3D Dynamic Focus System – FR70-C
Super large work field Standard large field
Focal adjust option: automatic, manual.
Flexible large field processing
Through the dynamic focus system control, it can be 0.64@2000x2000mmwork field.
Superfine spot size, super high speed.
FR70-C minimum spot line 0.12@350x350mm@10640mm.
FR70-C superfine spot size, super high speed, smooth cutting effect, little heat impact.
Leather cutting without sticking and charring.
Application Highlight
● Roll to roll leather marking
● Curved surface moving line marking
● Filming
● Drilling
Super large moving line version ( @2000x2000mm)
Super large leather marking
Super large field leather marking and cutting
(widely used in sandpaper cutting, carbon fiber cutting, leather cutting )
Application Video
Product Technical Information
| Items | Output Voltage(VDC) | ±24 |
| Current(A) | 6A(Rms) 19A(Prack) |
|
| Protocol | XY2-100 Protocol | |
| weight (KG) | 34 | |
| Size(mm) | 655*250*278 |
| cooling condition | Cooling Media | Distilled or de-ionized water plus corrosion inhibitor |
| Termperature(°C) | 22-28 | |
| Recommended cooling pressure(bar) | 2-3 | |
| Recommended flow rate(l/min) | 4-6 |
| Optical Specifications | Reflect mirror(mm) | SIC |
| Wavelength(nm) | 10600nm | |
| Single lens transmission | ≥99.7% | |
| System transmission | ≥82% | |
| Aperture size(mm) | ≤65mm | |
| Subsystem inputbeam diameter(mm) | 13.5~15mm | |
| Coating index | 1/2λ(PV) |
| Galvanometer specifications | ScanAngle(°) | ±11 |
| Repeatability(μrad) | 8 | |
| Max.Gain Drift(ppm/k) | 100 | |
| Max.Offset Drift(μrad/k) | 30 | |
| Long-term drift over 8h(mrad) | ≤0.3 | |
| Tracking Error(ms) | ≤1.2 | |
| Max.processing speed(dharaters/s) | 8000mm/s@1200×1200;4000mm/s@650x650 | |
| Purge gas | Purge gas | N2(purity 99.95%)or Clean, Dry Air(purity 99.995%, oil free, 1 micron filtered) |
| * Other gas which not meet the specification stated above is not permitted to apply to this sub-system. | ||
Large Field Version
| Working Field & Spot Diameter | Working Field(mm) | 700x700 | 800x800 | 900x900 | 1000x1000 | 1200×1200 | 1600×1600 | 2000×2000 |
| The Min.Spot Diamneter@1/e2(mrm) | 0.27 | 0.31 | 0.34 | 0.38 | 0.43 | 0.54 | 0.64 | |
| Focal length(mm) | 761 | 881 | 1001 | 1121 | 1361 | 1841 | 2321 |
Small Field Version
| Working Field & Spot Diameter | Working Field(mm) | 350x350 | 450x450 | 550×550 | 650×650 | 750x750 | 850x850 |
| The Min.Spot Diameter@1/e2(mm) | 0.134 | 0.162 | 0.188 | 0.221 | 0.251 | 0.282 | |
| Focal length(mm) | 341 | 461 | 581 | 701 | 821 | 941 |
Mechanical Drawing
Write your message here and send it to us
