Factory making Which 3d Printer - 3D Scanner-CO2-C70 – FEELTEK

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We're commitment to offer you the competitive price ,remarkable products excellent, also as fast delivery for Skull Scan , Laser Engraving Curved Surface , 3d Printed Stuff , For additional queries or should you might have any question regarding our goods, make sure you do not hesitate to call us.

Factory making Which 3d Printer - 3D Scanner-CO2-C70 – FEELTEK Detail:

Product characteristics

Description

- Standard XY2-100 protocol,open interface, compatible with popular control card on the market.

- Support wavelength: 10640nm10200nm9400nm.

- Design of positive pressure cavity to effectively ensure the cleanliness of optical path system.

- Real-time feedback digital drive technology to achieve higher positioning accuracy and machining characteristics.

- The controllable of Z axis optical design, easy to achieve working field switch and its corresponding focal point set70mm aperture size, easy to achieve 2000mm×2000mm working field.

- Ultra-fine spot, minimum spot diameter 0.12mm@350×350@10640.

Application

Roll to roll leather marking,Carving,Precision film cutting,Drilling

Version

Pro,P2

General specification

Power Supply	InputVoltage（VAC）	170~264
	OutputVoltage（VDC）	±24/±28
	Current（A）	4A（3sets）

1）Three power supply independently

Cooling condition

Coolina media	Distilled or de-ionized water plus corrosion inhibitor
Temperature	22-28℃
Suggestcoolingpressure	2-3bar
Recommendedflowrate	4-6（l/min）

Purge gas

Purge gas	N2 （purity 99.95%） or Clean, Dry Air（purity 99.995%，oil free, 1 micron filtered）
Dewpoint temperature	10degreeslowerthaninletcoolantwaterto the sub-system
Recommendedflowrate	2.8~3.5 l/min

*Other gas which not meet the specification stated above is not permitted to apply to this sub-system.

Environmental requirement

Ambienttemperature（°）	25±10
Storagetemperature（°）	-10~+60
Humidity	≤75% non condensing

Galvanometer Specifications

Scan Angle（°）	±11
Repeatability（μrad）	8
Max. Gain Drift（ppm/K）	100
Max. Offset Drift（μrad/K）	30
Long-termdriftover8h（mrad）	0.5
Max.processingspeed（mm/s）	8000mm/s@1200x12004000mm/s@650×650
Tracking Error（ms）	≤1.2

Optical specifications

Reflect mirror	SIC
Wavelength	10600nm
Single lens transmission	≥99.7%
System transmission	≥82%
Aperture Size	≤65mm
Subsysteminputbeamdiameter	9mm/13mm/20mm
Coating index	1/2入（PV）

*pw is not include in standard configuration

Working filed & Spot Diamete

Working Field（mm）	Large Field Version	700×700	800×800	900×900	1000×1000
Focal length（mm）		761	881	1001	1121
The Min. Spot Diameter@1/e²（mm）		0.27	0.31	0.34	0.38

Working Field（mm）	Large Field Version	1200×1200	1600×1600	200×2000
Focal length（mm）		1361	1841	2321
The Min. Spot Diameter@1/e²（mm）		0.43	0.54	0.64

Working Field（mm）

Small FieldVersion

350×350

450×450

550×550

Focal length（mm）

341

461

581

TheMin.SpotDiameter

@1/e²（mm）

0.134

0.162

0.188

Working Field（mm）

Small FieldVersion

650×650

750×750

850×850

Focal length（mm）

701

821

941

TheMin.SpotDiameter

@1/e²（mm）

0.221

0.251

0.282

Product detail pictures:

Related Product Guide:

We enjoy an extremely good status among our prospects for our great merchandise top quality, competitive price and the ideal service for Factory making Which 3d Printer - 3D Scanner-CO2-C70 – FEELTEK , The product will supply to all over the world, such as: Afghanistan , Pretoria , United Kingdom , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

3d Acrylic Engraving

Affordable Laser Cutter

Disaster Recovery Sla

Fiber Laser Jewelry

High End 3d Printer

Wood Engraving Service

The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.