factory Outlets for Monroe Laser Engraving - 3D Dynamic Focus System – FR70-C – FEELTEK
factory Outlets for Monroe Laser Engraving - 3D Dynamic Focus System – FR70-C – FEELTEK Detail:
Super large work field Standard large field
Focal adjust option: automatic, manual.
Flexible large field processing
Through the dynamic focus system control, it can be 0.64@2000x2000mmwork field.
Superfine spot size, super high speed.
FR70-C minimum spot line 0.12@350x350mm@10640mm.
FR70-C superfine spot size, super high speed, smooth cutting effect, little heat impact.
Leather cutting without sticking and charring.
Application Highlight
● Roll to roll leather marking
● Curved surface moving line marking
● Filming
● Drilling
Super large moving line version ( @2000x2000mm)
Super large leather marking
Super large field leather marking and cutting
(widely used in sandpaper cutting, carbon fiber cutting, leather cutting )
Application Video
Product Technical Information
| Items | Output Voltage(VDC) | ±24 |
| Current(A) | 12A | |
| Protocol | XY2-100 Protocol | |
| weight (KG) | 34 | |
| Size(mm) | 655*250*278 |
| cooling condition | Cooling Media | Distilled or de-ionized water plus corrosion inhibitor |
| Termperature(°C) | 22-28 | |
| Recommended cooling pressure(bar) | 2-3 | |
| Recommended flow rate(l/min) | 4-6 |
| Optical Specifications | Reflect mirror(mm) | SIC |
| Wavelength(nm) | 10600nm | |
| Single lens transmission | ≥99.7% | |
| System transmission | ≥82% | |
| Aperture size(mm) | ≤65mm | |
| Subsystem inputbeam diameter(mm) | 13.5~15mm | |
| Coating index | 1/2λ(PV) |
| Galvanometer specifications | ScanAngle(°) | ±11 |
| Repeatability(μrad) | 8 | |
| Max.Gain Drift(ppm/k) | 100 | |
| Max.Offset Drift(μrad/k) | 30 | |
| Long-term drift over 8h(mrad) | ≤0.3 | |
| Tracking Error(ms) | ≤1.2 | |
| Max.processing speed(dharaters/s) | 8000mm/s@1200×1200;4000mm/s@650×650 | |
| Purge gas | Purge gas | N2(purity 99.95%)or Clean, Dry Air(purity 99.995%, oil free, 1 micron filtered) |
| * Other gas which not meet the specification stated above is not permitted to apply to this sub-system. | ||
Large Field Version
| Working Field & Spot Diameter | Working Field(mm) | 700×700 | 800×800 | 900x90o | 1000×1000 | 1200×1200 | 1600×1600 | 2000×2000 |
| The Min.Spot Diamneter@1/e2(mrm) | 0.27 | 0.31 | 0.34 | 0.38 | 0.43 | 0.54 | 0.64 | |
| Focal length(mm) | 761 | 881 | 1001 | 1121 | 1361 | 1841 | 2321 |
Small Field Version
| working Field & Spot Diameter | working Field(mm) | 350×350 | 450×450 | 550×550 | 650×650 | 750×750 | 850×850 |
| The Min.Spot Diameter@1/e2(mm) | 0.134 | 0.162 | 0.188 | 0.221 | 0.251 | 0.282 | |
| Focal length(mm) | 341 | 461 | 581 | 701 | 821 | 941 |
Mechanical Drawing
Product detail pictures:
Related Product Guide:
We can normally fulfill our respected consumers with our great excellent, great value and good provider due to we're much more specialist and extra hard-working and do it in cost-effective way for factory Outlets for Monroe Laser Engraving - 3D Dynamic Focus System – FR70-C – FEELTEK , The product will supply to all over the world, such as: Seattle , Japan , Estonia , We expect to deliver merchandise and services to more users in global aftermarket markets; we launched our global branding strategy by providing our excellent products and solutions all over the world by virtue of our well reputed partners letting global users keep pace with technology innovation and achievements with us.
By Alberta
from Rwanda
- 2017.12.19 11:10
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Aaron
from Marseille
- 2017.12.02 14:11
Write your message here and send it to us
