2.5D Tsararren Mayar da hankali
Zurfin zane-zane, ƙaramin filin sarrafa kayan masarufi Zaɓin fifiko don ƙaramar sarrafawa
CNC harsashi, ƙura rigakafin, m tsarin, sauki hadewa.
Zaɓin ƙirar sanyaya ruwa, ana iya amfani da shi ga buƙatun ɗimbin zafin jiki.
Yana ɗaukar fasahar tuƙi mai faɗin bugun jini na dijital, ya mallaki mafi girman saurin amsawa da ƙarancin zafin jiki.
FE10
FE15
FE20
Haskakawa: hakowa, babban madaidaicin alama
Na'urar gani tana sarrafa wurin mai da hankali kuma ana iya sarrafa shi ta software, yadda ya kamata yana rage faɗuwar ƙarshen.
Mai da hankali mai ƙarfi zai iya gane aikace-aikacen saman 3D.
Babu buƙatar ɗagawa na gani na inji, tsari mai sauƙi, kuma mai sauƙin cimma aiki da kai, haɓaka inganci.
Babban inganci
Ƙaƙwalwar axis da XY axis an haɗa su da software gabaɗaya, kuma ana kammala biyan diyya mai faɗi a cikin ƙananan daƙiƙai tare da ingantaccen aiki.
Babban daidaito
Tare da sauyawar zurfin sarrafawa, axis mai ƙarfi yana daidaita tsayin daka kuma yana daidaita tsakiyar tabo a cikin ainihin lokaci, wanda zai iya cimma daidaito mafi girma fiye da na'urar sikanin gargajiya.
Haskaka Aikace-aikacen
●Yin hakowa
●Zane
●Super madaidaicin alama
Gilashin hakowa (siffa daban-daban)
Daidaitaccen alama
Hard abu mai zurfi sassaka
Zane (kayan wuƙa)
Bidiyon Aikace-aikace
Bayanin Fasaha na Samfur
| Abubuwa | Input Voltage(VDC) | ± 15 |
| Yanzu (A) | 10 A | |
| Yarjejeniya | XY2-100 Protocol | |
| Yanayin Sanyi | Mai sanyaya Labarai | Distilled ko de-ionized ruwa tare da lalata mai hanawa |
| Zazzabi(°C) | 22-28 | |
| Nasihar matsa lamba mai sanyaya (masha) | 2-3 | |
| Adadin kwarara da aka yaba (l/min) | 4-6 |
| Abubuwa | Fitar da Wutar Lantarki (VDC) | ± 15 |
| Yanzu (A) | 10 A | |
| Yarjejeniya | XY2-100 Protocol | |
| Yanayin Sanyi | Mai sanyaya Labarai | Distilled ko de-ionized ruwa tare da lalata mai hanawa |
| Zazzabi(°C) | 22-28 | |
| Nasihar matsa lamba mai sanyaya (masha) | 2-3 | |
| Adadin kwarara da aka yaba (l/min) | 4-6 |
| Layin samfur | layin samfur | FE10 | FE15 | FE20 |
| Nauyi (KG) | 5.6 | 6.7 | 9 | |
| Girman (mm) | 297*125*120 | 339*125*120 | 337*134*153.5 |
| Ƙayyadaddun Galvanometer | FE10 | FE15 | FE20 | ||||||
| Sigar | Daidaitawa | Pro | P2 | Daidaitawa | Pro | P2 | Pro | P2 | |
| Kuskuren bin diddigi (ms) | ≤0.18 | ≤0.18 | ≤0.18 | ≤0.21 | ≤0.21 | ≤0.2 | ≤0.28 | ≤0.27 | |
| Maimaituwa (μrad) | 8 | 8 | 5 | 8 | 8 | 5 | 8 | 5 | |
| Juyin zafi (μrad/k) | <100 | <100 | <50 | <100 | <100 | <50 | <100 | <50 | |
| Draft na dogon lokaci (> 24h, zafin jiki) (mrad) | ≤0.2 | ≤0.2 | ≤0.1 | ≤0.2 | ≤0.2 | ≤0.1 | ≤0.2 | ≤0.1 | |
| Matsakaicin saurin sarrafawa (sharatoci/s) (yanayin inganci) | 600@100x100 | 650 @ 100x100 | 500@100x100 | ||||||
| Yanayin aiki (°C) | 25℃±10℃ | ||||||||
| FE10 Ƙididdiga na gani | Tsawon tsayi | 355nm ku | 532nm ku | 1064nm ku | ||
| Girman Budawa (mm) | ≤10mm | ≤10mm | ≤10mm | |||
| Zaɓuɓɓukan ƙara girman shigarwa | 2X | 2.66X | 2X | 2.66X | 1.16X | |
| Zurfin Z1) | ± 5mm / 25mm | |||||
| FE15 Ƙididdiga na gani | Tsawon tsayi | 355nm ku | 532nm ku | 1064nm ku | ||
| Girman Budawa (mm) | ≤15mm | ≤15mm | ≤15mm | |||
| Zaɓuɓɓukan ƙara girman shigarwa | 2X | 2.66X | 2X | 2.66X | 1.66X | |
| Zurfin Z2) | ± 5mm / 25mm | |||||
| FE20 Ƙididdiga na gani | Tsawon tsayi | 1064nm ku | ||||
| Girman Budawa (mm) | ≤20mm | |||||
| Zaɓuɓɓukan ƙara girman shigarwa | 2.1X | 2.57X | 2.66X | |||
| Zurfin Z3) | ± 5mm | |||||
1), 2), 3) Tsawon tsayi mai tsayi da gajeren tsayin tsayin tsayin tsayi don zaɓi. Bayanan jagora ya dogara ne akan F-θ 254 a ƙarƙashin 150 * 150mm.
Zane Injiniya
FE10
FE15
FE20
