2D Scanhead-15 Serial
15 Serial
Ruwa mai sanyaya da sanyaya iska don zaɓi.
Multiple SL S, SLM tsarin aikace-aikace.
High gudun domin Laser tsaftacewa, Laser waldi.
Babban madaidaici don bugu na 3D, rubutu, etching.
Bidiyon Aikace-aikace
Bayanin Fasaha na Samfur
| Ƙididdiga na gani | Girman (mm) | 15 | ||
| Diamita mai tsayi (mm) | 15 | |||
| Akwai Tsawon Wavelength(nm) | 355 532 1064/980 | |||
| Na gani Paramater | na gani Surface | 1/4 @ 633 | ||
| Kayan gani na gani | Si / SiC / QU | |||
| Ƙayyadaddun Galvanometer | Nauyi (KG) | 3 | ||
| Girman (mm) | 151x125x120 | |||
| Sigar | S15 | PS15 | Saukewa: PSH15 | |
| Scan Angle(°) | ± 11 | ± 10 | ± 10 | |
| Maimaituwa (μrad) | 8 | 8 | 5 | |
| Max.Gain Drift(ppm/k) | 100 | 50 | 50 | |
| Max.Offset Drift(μrad/k) | 30 | 30 | 30 | |
| Tsawon dogon lokaci sama da 8h (mrad) | ≤0.5 | ≤0.1 | ≤0.1 | |
| Kuskuren bin diddigi (ms) | <230 | <150 | <150 | |
| Lokacin Amsa Mataki 1% na Cikakken Sikeli1 | <460 | <410 | <410 | |
| Gudun Alama Na Musamman2 | 3 | 5 | 5 | |
| Gudun Matsayi Na Musamman2 | 10 | 15 | 15 | |
| Alamar Halaye Na Musamman3 | 500CPSKyakkyawan inganci | 600CPSKyakkyawan inganci | 650CPSKyakkyawan inganci | |
| 650CPSKyakkyawan Rubutu | 700CPSKyakkyawan Rubutu | 750CPSKyakkyawan Rubutu | ||
1) Amsa mataki 1% 2) 2D scanhead amfani da F160 F-θ ruwan tabarau 3) F160 F-θ ruwan tabarau, 1mm tsawo hali guda line, LenMark software & FEELTEK kula da katin
Zane Injiniya
FAQs
Kamfanin FEELTEK yana da sashin siyayya mai zaman kansa don siyan duk albarkatun ƙasa a tsakiya. Kowane danyen abu yana da masu samarwa da yawa. Kamfaninmu ya kafa cikakken bayanan mai ba da kaya. Masu ba da kayayyaki sune sanannun samfuran gida ko na waje don tabbatar da inganci da wadatar albarkatun ƙasa.
Binciken kayan da ke shigowa, sarrafa tsari da binciken masana'anta Bayan an gama samar da kowane tasha, ana gudanar da binciken ingancin, sannan a gudanar da gwajin samfurin, sannan ana gudanar da marufi da bayarwa bayan wucewar kwastan.
Ana iya isar da duk daidaitaccen samfurin a cikin kwanakin aiki 10.
Don warwarewar gyare-gyare, za a tabbatar da sake zagayowar isar yayin sadarwar farko.
