Tsarin Mayar da hankali na 3D - FR30-C
Tsarin sanyaya ruwa
Zaɓin ƙirar sanyaya ruwa, ana iya amfani da shi ga buƙatun ɗimbin zafin jiki.
Babban sarrafa filin mai sassauƙa
Tsarin tuƙi mai ƙarfi mai ƙarfi na Z axis, mitar amsawa≥100HZ@± 10°.
Dangane da buƙatun aikace-aikacen da sararin haɗin kai, akwai sigar mai lanƙwasa, babban sigar filin, da zaɓuɓɓukan ƙirar injina da yawa.
Tsarin CCD na kashe-axis na zaɓi, wanda aka yi amfani da shi a cikin saka alama a cikin layi mai motsi.
FR30-C Layin Layi
Daidaitaccen tsarin.
FR30-C Lanƙwasa katako (Hagu- Dama)
Takamaiman don haɗin ODM a cikin iyakantaccen bita.
FR30-C Karamin
Kyakkyawan zubar da zafi, ƙaramin tsari, dace da babban zafin jiki da ƙayyadaddun bita.
Haskakawa aikace-aikace: 3D bugu
FR30-C yana aiki tare da sarrafa tsarin mayar da hankali mai ƙarfi, ana iya amfani dashi a cikin SLS, SLM.
Babban Madaidaici
Yayin da adadin yadudduka na sarrafawa ke ƙaruwa, axis mai ƙarfi yana daidaita daidaitawa da daidaita wurin a ainihin-lokaci. Mafi ƙarancin tabo na FR30-C(C30) na iya kaiwa 0.11mm kai tsaye.
Babban inganci
Don haɓaka ingantaccen aiki mafi girma, FEELTEK yana haɓaka mafita mai ɗaukar hoto da yawa, da kuma dandamalin da ya dace.
Babban sarrafa filin mai sassauƙa
Ta hanyar sarrafa tsarin mayar da hankali mai ƙarfi, ana iya sarrafa shi daga 300 * 300mm zuwa filin aikin 1200 * 1200mm.
Haskaka Aikace-aikacen
●Laser Yankan
●Laser Marking
●Tsaftacewa
●sarrafa gardama mai saurin gaske
●3D aikace-aikace
●3D bugu
●Rubutun Laser
●Lanƙwasa shimfidar wuri mai motsi alamar alama
●Yin fim
Alamar motsi (Yoga mat)
3D alamar alama
Babban alamar filin (Jeans)
Jeans Laser alama
Alamar fata
3D bugu
Bidiyon Aikace-aikace
Bayanin Fasaha na Samfur
| sigar | FR30-C Layin Layi | FR30-C Ƙunƙarar Ƙarfafawa | FR30-C m | |
| Abubuwa | Ƙarfin wutar lantarki (VDc) | ± 24VDC | ± 24VDC | ± 15VDC |
| halin yanzu (A) | 10 A | 10 A | 10 A | |
| Yarjejeniya | xY2-100 yarjejeniya | xY2-100 yarjejeniya | xY2-100 yarjejeniya | |
| Nauyi (KG) | 15 | 21 | 13.5 | |
| Girman (mm) | 538*200*242.5 | 528*200*206 | 422*145*163 | |
| Ƙididdiga na gani | Girman Budawa (mm) | 30 | 30 | 30 |
| Diamita na katako mai shigarwa (mm) | 7.5, 9 | 7.5, 9 | 7.5, 9 |
| Ƙayyadaddun Galvanometer | Layin samfur | Daidaitawa | Pro | P2 |
| Scan Angle(°) | ± 11 | ± 11 | ± 11 | |
| Maimaituwa (μrad) | 8 | 8 | 5 | |
| Max.Gain Drift(ppm/k) | 100 | 100 | 50 | |
| Max.Offset Drift(μrad/k) | 30 | 30 | 15 | |
| Tsawon dogon lokaci sama da 8h (mrad) | ≤0.2 | ≤0.2 | ≤0.1 | |
| Kuskuren bin diddigi (ms) | ≤0.44 | ≤0.44 | ≤0.44 | |
| Matsakaicin saurin sarrafawa (haruffa/s) | 350@300x300 | 350@300x300 | 350@300x300 |
FR30-C Layin Layi
| Filin Aiki & Diamita Tabo | Filin Aiki (mm) | 300x300x100 | 400x400x120 | 500x500x120 | 600x600x120 | 750x750x150 | 800×800x150 | 1200x1200 1600×1600 |
| Diamita Min.Spot@1/e2(mm) | 0.23 | 0.28 | 0.33 | 0.39 | 0.46 | 0.49 | Sigar musamman | |
| Tsawon nesa (mm) | 366 | 466 | 566 | 676 | 838 | 936 |
FR30-C Ƙunƙarar Ƙarfafawa
| Filin Aiki & Diamita Tabo | Filin Aiki (mm) | 300x300 | 400x400 | 500x500 | 600x600 | 750x750 | 800x800 ku | 1200x1200 1600×1600 |
| Diamita Min.Spot@1/e2(mm) | 0.23 | 0.28 | 0.33 | 0.39 | 0.46 | 0.49 | sigar musamman | |
| Tsawon nesa (mm) | 362.5 | 462.5 | 562.5 | 672.5 | 834.5 | 932.5 |
FR30-C Karamin
| Filin Aiki & Tabo Diamita | Filin Aiki (mm) | 100x100x30 | 200×200x60 | 300x300x100 | 400x400x120 | 500x500x120 | 600x600x120 | 1200x1200 |
| Diamita Min.Spot@1/e2(mm) | 0.11 | 0.16 | 0.21 | 0.27 | 0.32 | 0.36 | Musamman sigar | |
| Tsawon nesa (mm) | 171 | 271 | 371 | 471 | 571 | 681 |
Zane Injiniya
FR30-C Layin Layi
FR30-C Ƙunƙarar Ƙarfafawa
FR30-C Karamin
