Tsarin Mayar da hankali na 3D - FR40-C
Max.scan gudun 30% mafi kyawun wuri mai kyau PK FR30-C
II-IV kayan aikin gani, ƙananan hasara mai haske tare da tabo mai bakin ciki 0.12mm@150x150mm@10640nm.
Zaɓin ƙirar sanyaya ruwa, ana iya amfani da shi ga buƙatun ɗumbin zafin jiki.
Zaɓin daidaita mai da hankali ta atomatik don zaɓar, ƙare filin aiki da tsayin tsayin daka ta hanyar software.
Zaɓin daidaitawa mai da hankali: atomatik, manual.
FR40-C Layin Layi
Daidaitaccen tsarin.
FR40-C mai niƙaƙƙen katako
Musamman don ƙulla ƙirar katako mai nannade.
Babban sarrafa filin mai sassauƙa
Ta hanyar sarrafa tsarin mayar da hankali mai ƙarfi, ana iya sarrafa shi daga 150 * 150mm zuwa filin aikin 1200 * 1 200mm.
Karamin girman tabo
Daidai da saurin C30, 30% mafi kyawun wuri.
Haskaka Aikace-aikacen
●Babban alamar filin
●Laser Yankan
●Rubutun Laser
●Yin fim
Hakowa harsashi na kwamfutar tafi-da-gidanka
Yankan fim
Yin fim
Bidiyon Aikace-aikace
Bayanin Fasaha na Samfur
| Sigar | FR40-C Layin Layi | FR40-C mai niƙaƙƙen katako | |
| almara | Fitar da Wutar Lantarki (VDC) | ± 24 | ± 24 |
| Yanzu (A) | 12 A | 12 A | |
| Yarjejeniya | XY2-100 Protocol | XY2-100 Protocol | |
| Nauyi (KG) | 15 | 21.5 | |
| Girman (mm) | 538*200*242.5 | 547.5*200*184.5 | |
| Ƙididdiga na gani | Girman Budawa (mm) | 40 | 40 |
| Diamita na katako mai shigarwa (mm) | 7.5, 9, 12.5 | 7.5, 9, 12.5 |
| Ƙayyadaddun Galvanometer | Scan Angle(°) | 11.5 |
| Maimaituwa (μrad) | 8 | |
| Max.Gain Drift(ppm/k) | 100 | |
| Max.Offset Drift(μrad/k) | 30 | |
| Tsawon dogon lokaci sama da 8h (mrad) | ≤0.2 | |
| Kuskure (ms) | ≤0.68 | |
| Matsakaicin saurin sarrafawa [haruffa/s) | 300@400x400 |
FR40-C Layin Layi
| Filin Aiki & Diamita Tabo | Filin Aiki (mm) | 150x150 | 250x250 | 350x350 | 450x450 | 500x500 | 600×600 | 800x800 ku | 1000x1000 | 1200x1200 |
| Diamita Min.Spot@1/e2(mm) | 0.12 | 0.162 | 0.215 | 0.256 | 0.275 | 0.32 | 0.443 | 0.551 | 0.645 | |
| Tsawon nesa (mm) | 216 | 316 | 416 | 516 | 566 | 676 | 976 | 1216 | 1456 |
FR40-C mai niƙaƙƙen katako
| Filin Aiki & Diamita Tabo | Filin Aiki (mm) | 150x150 | 250x250 | 350x350 | 450x450 | 500x500 | 600×600 | 800x800 ku | 1000x1000 | 1200x1200 |
| Diamita Min.Spot@1/e2(mm) | 0.12 | 0.162 | 0.215 | 0.256 | 0.275 | 0.32 | 0.443 | 0.551 | 0.645 | |
| Tsawon nesa (mm) | 212.5 | 312.5 | 412.5 | 512.5 | 562.5 | 892.5 | 972.5 | 1212.5 | 1452.5 |
Zane Injiniya
FR40-C Layin Layi
FR40-C mai niƙaƙƙen katako
Ku rubuta sakonku anan ku aiko mana
