Sistemụ Nlekwasị anya 3D dị omimi - FR30-C
Ime ka mmiri dị jụụ
Nhọrọ nke ime ka mmiri dị jụụ, enwere ike itinye ya na ihe achọrọ mkpagharị okpomọkụ dị elu.
Nhazi nnukwu ubi na-agbanwe agbanwe
Nhazi modul elekwasị anya Z axis ike ugboro abụọ, ugboro nzaghachi≥100HZ@± 10°.
Dị ka ngwa chọrọ na ohere ntinye, enwere ụdị agbagọ, ụdị ubi buru ibu, yana nhọrọ nhazi nhazi ọtụtụ.
Modul CCD kwụsịrị-axis nhọrọ, etinyere na ntinye akara n'ahịrị na-akpụ akpụ.
FR30-C Linear doo
Usoro ọkọlọtọ.
Oghere mpịaji FR30-C (aka ekpe- aka nri)
Specific maka mwekota ODM na Space Limited ogbako.
Kọmpat FR30-C
Mgbasa ọkụ ka mma, nhazi kọmpat, dabara maka oke okpomọkụ na oghere ogbako nwere oke.
Ngwa pụta ìhè: 3D obibi
FR30-C na-etinye aka na njikwa usoro mgbado anya siri ike, enwere ike itinye ya na SLS, SLM.
Elu nkenke
Ka ọnụ ọgụgụ nke nhazi ọkwa na-abawanye, axis na-agbanwe agbanwe na-ahazikwa elekwasị anya ma dozie ebe ahụ ozugbo. Ebe kacha nta nke FR30-C(C30) nwere ike iru 0.11mm ozugbo.
Ịrụ ọrụ dị elu
Iji melite arụmọrụ nhazi dị elu, FEELTEK na-emepụta ngwọta multi-scanheads, yana ikpo okwu kwekọrọ.
Nhazi nnukwu ubi na-agbanwe agbanwe
Site na njikwa usoro elekwasị anya siri ike, enwere ike iji ya rụọ ọrụ site na 300 * 300mm ruo 1200 * 1200mm ọrụ.
Isi ihe ngwa
●Laser ịcha
●Laser Marking
●Nhicha
●Nhazi ofufe dị elu
●Ngwa 3D
●Mbipụta 3D
●Ederede Laser
●Akara akara n'elu agbagọ agbagọ
●Ịse ihe nkiri
Ịrịba ahịrị na-agagharị (Yoga mat)
Ngosipụta elu 3D
Nnukwu akara akara (Jeans)
Jeans laser marking
Akara akpụkpọ anụ
Mbipụta 3D
Vidiyo ngwa
Ozi nka nka ngwaahịa
| ụdị | FR30-C Linear doo | FR30-C apịaji doo | Kọmpat FR30-C | |
| Ihe | Voltage mmepụta (VDc) | ± 24VDC | ± 24VDC | ± 15VDC |
| ugbu a (A) | 10A | 10A | 10A | |
| Protocol | Usoro xY2-100 | Usoro xY2-100 | Usoro xY2-100 | |
| Ibu(KG) | 15 | 21 | 13.5 | |
| Nha (mm) | 538*200*242.5 | 528*200*206 | 422*145*163 | |
| Nkọwapụta anya | Ogo oghere (mm) | 30 | 30 | 30 |
| Dayameta ngwunye ntinye (mm) | 7.5, 9 | 7.5, 9 | 7.5, 9 |
| Nkọwapụta Galvanometer | Ahịrị ngwaahịa | Ọkọlọtọ | Pro | P2 |
| Nyocha akụkụ(°) | ±11 | ±11 | ±11 | |
| Nkwagharị (μrad) | 8 | 8 | 5 | |
| Oke.Gain Drift(ppm/k) | 100 | 100 | 50 | |
| Max.Offset Drift(μrad/k) | 30 | 30 | 15 | |
| Ntugharị ogologo oge karịrị awa 8 (mrad) | ≤0.2 | ≤0.2 | ≤0.1 | |
| Erro(ms) nsochi | ≤0.44 | ≤0.44 | ≤0.44 | |
| Ọsọ nhazi kacha ( mkpụrụedemede/s) | 350 @ 300x300 | 350 @ 300x300 | 350 @ 300x300 |
FR30-C Linear doo
| Mpaghara Na-arụ ọrụ & Dayameta ntụpọ | Ubi ọrụ (mm) | 300x300x100 | 400x400x120 | 500x500x120 | 600x600x120 | 750x750x150 | 800×800x150 | 1200x1200 1600×1600 |
| Dayameta Min.Spot@1/e2(mm) | 0.23 | 0.28 | 0.33 | 0.39 | 0.46 | 0.49 | Ụdị ahaziri ahazi | |
| Ogologo oghere (mm) | 366 | 466 | 566 | 676 | 838 | 936 |
FR30-C apịaji doo
| Ubi ọrụ & Dayameta ntụpọ | Ubi ọrụ (mm) | 300x300 | 400x400 | 500x500 | 600x600 | 750x750 | 800x800 | 1200x1200 1600×1600 |
| Dayameta Min.Spot@1/e2(mm) | 0.23 | 0.28 | 0.33 | 0.39 | 0.46 | 0.49 | ahaziri ụdị | |
| Ogologo oghere (mm) | 362.5 | 462.5 | 562.5 | 672.5 | 834.5 | 932.5 |
Kọmpat FR30-C
| Ogige ọrụ & Dayameta ntụpọ | Ubi ọrụ (mm) | 100x100x30 | 200 × 200x60 | 300x300x100 | 400x400x120 | 500x500x120 | 600x600x120 | 1200x1200 |
| Dayameta Min.Spot@1/e2(mm) | 0.11 | 0.16 | 0.21 | 0.27 | 0.32 | 0.36 | ahaziri ụdị | |
| Ogologo oghere (mm) | 171 | 271 | 371 | 471 | 571 | 681 |
Ihe osise eji arụ ọrụ
FR30-C Linear doo
FR30-C apịaji doo
Kọmpat FR30-C
