2.5D Dynamic Focus System
Zolemba zakuya, gawo laling'ono laling'ono lopangira Kusankha Kwambiri pakupanga kwapang'ono
CNC chipolopolo, kupewa fumbi, kapangidwe yaying'ono, yosavuta kuphatikiza.
Kusankha kuzirala kwamadzi, kumatha kugwiritsidwa ntchito pazofunikira pakutentha kwambiri.
Imatengera ukadaulo wa digito wa pulse wide modulation drive, imakhala ndi liwiro loyankhira komanso kutsika kwa kutentha.
FE10
FE15
FE20
Yang'anani: kubowola, cholembera cholondola kwambiri
Malo okhazikika amawongoleredwa ndi kuwala ndipo amatha kuwongolera ndi mapulogalamu, mothandiza kuchepetsa kugwa.
Dynamic focus imatha kuzindikira mawonekedwe a 3D pamwamba.
Palibe chifukwa chokweza makina opangira, mawonekedwe osavuta, komanso osavuta kupeza makina, kuwongolera bwino.
Kuchita bwino kwambiri
Ma axis osunthika ndi XY axis amalumikizidwa bwino ndi mapulogalamu, ndipo kubweza kokhazikika kumamalizidwa mu ma microseconds ndikuchita bwino kwambiri.
Kulondola kwambiri
Ndi kusintha kwa kuya kwa makulidwe, axis yosunthika imasinthiratu kutalika kwapakati ndikusintha malo apakati munthawi yeniyeni, yomwe imatha kukhala yolondola kwambiri kuposa masikanidwe achikhalidwe.
Kuunika kwa Ntchito
●Kubowola
●Kujambula
●Chizindikiro chapamwamba kwambiri
Kubowola magalasi (mawonekedwe osiyanasiyana)
Kulemba molondola
Zolimba zakuya chosema
Engraving (Chida cha mpeni)
Kanema wa Ntchito
Zambiri Zaukadaulo Zamankhwala
| Zinthu | Input Voltage (VDC) | ±15 |
| Panopa(A) | 10A | |
| Ndondomeko | XY2-100 Protocol | |
| Mkhalidwe Wozizirira | Kuzizira Media | Madzi osungunulidwa kapena opangidwa ndi ionized kuphatikizapo corrosion inhibitor |
| Kutentha(°C) | 22-28 | |
| Kupanikizika kozizira kovomerezeka (bar) | 2-3 | |
| Kuthamanga kovomerezeka (l/mphindi) | 4-6 |
| Zinthu | Mphamvu yamagetsi (VDC) | ±15 |
| Panopa(A) | 10A | |
| Ndondomeko | XY2-100 Protocol | |
| Mkhalidwe Wozizirira | Kuzizira Media | Madzi osungunulidwa kapena opangidwa ndi ionized kuphatikizapo corrosion inhibitor |
| Kutentha(°C) | 22-28 | |
| Kupanikizika kozizira kovomerezeka (bar) | 2-3 | |
| Kuthamanga kovomerezeka (l/mphindi) | 4-6 |
| Mzere wopanga | mzere wazinthu | FE10 | FE15 | FE20 |
| Kulemera (KG) | 5.6 | 6.7 | 9 | |
| Kukula (mm) | 297*125*120 | 339*125*120 | 337*134*153.5 |
| Zithunzi za Galvanometer | FE10 | FE15 | FE20 | ||||||
| Baibulo | Standard | Pro | P2 | Standard | Pro | P2 | Pro | P2 | |
| Vuto pakutsata (ms) | ≤0.18 | ≤0.18 | ≤0.18 | ≤0.21 | ≤0.21 | ≤0.2 | ≤0.28 | ≤0.27 | |
| Kubwerezabwereza (μrad) | 8 | 8 | 5 | 8 | 8 | 5 | 8 | 5 | |
| Kutsika kwa kutentha(μrad/k) | <100 | <100 | <50 | <100 | <100 | <50 | <100 | <50 | |
| Kuyenda kwanthawi yayitali (> 24h, kutentha kwachipinda)(mrad) | ≤0.2 | ≤0.2 | ≤0.1 | ≤0.2 | ≤0.2 | ≤0.1 | ≤0.2 | ≤0.1 | |
| Kuthamanga kwa Max.processing(sharac/s)(mode yapamwamba) | 600 @ 100x100 | 650 @ 100x100 | 500 @ 100x100 | ||||||
| Kutentha kwa ntchito(°C) | 25℃±10℃ | ||||||||
| FE10 Zofotokozera za Optical | Wavelength | 355nm pa | 532nm pa | 1064nm | ||
| Kukula kwa kabowo(mm) | ≤10 mm | ≤10 mm | ≤10 mm | |||
| Zosankha zokulitsa | 2X | 2.66X | 2X | 2.66X | 1.16X | |
| Z kuya1) | ± 5mm / ± 25mm | |||||
| FE15 Zofotokozera za Optical | Wavelength | 355nm pa | 532nm pa | 1064nm | ||
| Kukula kwa kabowo(mm) | ≤15 mm | ≤15 mm | ≤15 mm | |||
| Zosankha zokulitsa | 2X | 2.66X | 2X | 2.66X | 1.66X | |
| Z kuya2) | ± 5mm / ± 25mm | |||||
| FE20 Zofotokozera za Optical | Wavelength | 1064nm | ||||
| Kukula kwa kabowo(mm) | ≤20 mm | |||||
| Zosankha zokulitsa | 2.1X | 2.57X | 2.66X | |||
| Z kuya3) | ± 5 mm | |||||
1), 2), 3) Utali wokhazikika wautali ndi mtundu wautali wokhazikika wosankha.Deta yapamanja imachokera pa F-θ 254 pansi pa 150*150mm.
Zojambula zamakina
FE10
FE15
FE20
