Popular Design for Metal Engraver Laser Cutter - 3D Dynamic Focus System – FR70-C – FEELTEK
Popular Design for Metal Engraver Laser Cutter - 3D Dynamic Focus System – FR70-C – FEELTEK Detail:
Super large work field Standard large field
Focal adjust option: automatic, manual.
Flexible large field processing
Through the dynamic focus system control, it can be 0.64@2000x2000mmwork field.
Superfine spot size, super high speed.
FR70-C minimum spot line 0.12@350x350mm@10640mm.
FR70-C superfine spot size, super high speed, smooth cutting effect, little heat impact.
Leather cutting without sticking and charring.
Application Highlight
● Roll to roll leather marking
● Curved surface moving line marking
● Filming
● Drilling
Super large moving line version ( @2000x2000mm)
Super large leather marking
Super large field leather marking and cutting
(widely used in sandpaper cutting, carbon fiber cutting, leather cutting )
Application Video
Product Technical Information
Items | Output Voltage(VDC) | ±24 |
Current(A) | 12A | |
Protocol | XY2-100 Protocol | |
weight (KG) | 34 | |
Size(mm) | 655*250*278 |
cooling condition | Cooling Media | Distilled or de-ionized water plus corrosion inhibitor |
Termperature(°C) | 22-28 | |
Recommended cooling pressure(bar) | 2-3 | |
Recommended flow rate(l/min) | 4-6 |
Optical Specifications | Reflect mirror(mm) | SIC |
Wavelength(nm) | 10600nm | |
Single lens transmission | ≥99.7% | |
System transmission | ≥82% | |
Aperture size(mm) | ≤65mm | |
Subsystem inputbeam diameter(mm) | 13.5~15mm | |
Coating index | 1/2λ(PV) |
Galvanometer specifications | ScanAngle(°) | ±11 |
Repeatability(μrad) | 8 | |
Max.Gain Drift(ppm/k) | 100 | |
Max.Offset Drift(μrad/k) | 30 | |
Long-term drift over 8h(mrad) | ≤0.3 | |
Tracking Error(ms) | ≤1.2 | |
Max.processing speed(dharaters/s) | 8000mm/s@1200×1200;4000mm/s@650×650 | |
Purge gas | Purge gas | N2(purity 99.95%)or Clean, Dry Air(purity 99.995%, oil free, 1 micron filtered) |
* Other gas which not meet the specification stated above is not permitted to apply to this sub-system. |
Large Field Version
Working Field & Spot Diameter | Working Field(mm) | 700×700 | 800×800 | 900x90o | 1000×1000 | 1200×1200 | 1600×1600 | 2000×2000 |
The Min.Spot Diamneter@1/e2(mrm) | 0.27 | 0.31 | 0.34 | 0.38 | 0.43 | 0.54 | 0.64 | |
Focal length(mm) | 761 | 881 | 1001 | 1121 | 1361 | 1841 | 2321 |
Small Field Version
working Field & Spot Diameter | working Field(mm) | 350×350 | 450×450 | 550×550 | 650×650 | 750×750 | 850×850 |
The Min.Spot Diameter@1/e2(mm) | 0.134 | 0.162 | 0.188 | 0.221 | 0.251 | 0.282 | |
Focal length(mm) | 341 | 461 | 581 | 701 | 821 | 941 |
Mechanical Drawing
Product detail pictures:
Related Product Guide:
With our excellent administration, strong technical capability and strict excellent control method, we carry on to offer our clients with responsible good quality, reasonable costs and great companies. We intention at becoming considered one of your most responsible partners and earning your pleasure for Popular Design for Metal Engraver Laser Cutter - 3D Dynamic Focus System – FR70-C – FEELTEK , The product will supply to all over the world, such as: Slovak Republic , Latvia , Colombia , We have more than 10 years exported experience and our products have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
By Colin Hazel from Nigeria - 2017.08.21 14:13
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Sally from Sweden - 2017.05.31 13:26
Write your message here and send it to us