professional factory for Hobbyist Laser Cutter - 3D Dynamic Focus System – FR70-C – FEELTEK
professional factory for Hobbyist Laser Cutter - 3D Dynamic Focus System – FR70-C – FEELTEK Detail:
Super large work field Standard large field
Focal adjust option: automatic, manual.
Flexible large field processing
Through the dynamic focus system control, it can be 0.64@2000x2000mmwork field.
Superfine spot size, super high speed.
FR70-C minimum spot line 0.12@350x350mm@10640mm.
FR70-C superfine spot size, super high speed, smooth cutting effect, little heat impact.
Leather cutting without sticking and charring.
Application Highlight
● Roll to roll leather marking
● Curved surface moving line marking
● Filming
● Drilling
Super large moving line version ( @2000x2000mm)
Super large leather marking
Super large field leather marking and cutting
(widely used in sandpaper cutting, carbon fiber cutting, leather cutting )
Application Video
Product Technical Information
| Items | Output Voltage(VDC) | ±24 |
| Current(A) | 12A | |
| Protocol | XY2-100 Protocol | |
| weight (KG) | 34 | |
| Size(mm) | 655*250*278 |
| cooling condition | Cooling Media | Distilled or de-ionized water plus corrosion inhibitor |
| Termperature(°C) | 22-28 | |
| Recommended cooling pressure(bar) | 2-3 | |
| Recommended flow rate(l/min) | 4-6 |
| Optical Specifications | Reflect mirror(mm) | SIC |
| Wavelength(nm) | 10600nm | |
| Single lens transmission | ≥99.7% | |
| System transmission | ≥82% | |
| Aperture size(mm) | ≤65mm | |
| Subsystem inputbeam diameter(mm) | 13.5~15mm | |
| Coating index | 1/2λ(PV) |
| Galvanometer specifications | ScanAngle(°) | ±11 |
| Repeatability(μrad) | 8 | |
| Max.Gain Drift(ppm/k) | 100 | |
| Max.Offset Drift(μrad/k) | 30 | |
| Long-term drift over 8h(mrad) | ≤0.3 | |
| Tracking Error(ms) | ≤1.2 | |
| Max.processing speed(dharaters/s) | 8000mm/s@1200×1200;4000mm/s@650×650 | |
| Purge gas | Purge gas | N2(purity 99.95%)or Clean, Dry Air(purity 99.995%, oil free, 1 micron filtered) |
| * Other gas which not meet the specification stated above is not permitted to apply to this sub-system. | ||
Large Field Version
| Working Field & Spot Diameter | Working Field(mm) | 700×700 | 800×800 | 900x90o | 1000×1000 | 1200×1200 | 1600×1600 | 2000×2000 |
| The Min.Spot Diamneter@1/e2(mrm) | 0.27 | 0.31 | 0.34 | 0.38 | 0.43 | 0.54 | 0.64 | |
| Focal length(mm) | 761 | 881 | 1001 | 1121 | 1361 | 1841 | 2321 |
Small Field Version
| working Field & Spot Diameter | working Field(mm) | 350×350 | 450×450 | 550×550 | 650×650 | 750×750 | 850×850 |
| The Min.Spot Diameter@1/e2(mm) | 0.134 | 0.162 | 0.188 | 0.221 | 0.251 | 0.282 | |
| Focal length(mm) | 341 | 461 | 581 | 701 | 821 | 941 |
Mechanical Drawing
Product detail pictures:
Related Product Guide:
Bear "Customer first, High quality first" in mind, we perform closely with our consumers and provide them with efficient and experienced services for professional factory for Hobbyist Laser Cutter - 3D Dynamic Focus System – FR70-C – FEELTEK , The product will supply to all over the world, such as: Croatia , Russia , Ukraine , We are proud to supply our products to every costumer all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
By Edwina
from Bolivia
- 2018.11.28 16:25
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Barbara
from Sao Paulo
- 2018.12.25 12:43
Write your message here and send it to us
