3D Nidaamka Diirada Saarida Firfircoon - FR40-C
Xawaaraha ugu sarreeya ee 30% barta ugu fiican ee PK FR30-C
II-IV qaybaha indhaha, luminta iftiin yar oo leh bar khafiif ah 0.12mm@150x150mm@10640nm.
Naqshadaynta qaboojinta biyaha ee ikhtiyaarka ah, waxaa lagu dabaqi karaa shuruudaha heerkul sare.
Xulasho toos ah oo toos ah u hagaajinta xulashada, dhamaystirka goobta shaqada iyo dhererka fogaanta ku beddelashada software.
Xulashada hagaajinta diiradda: si toos ah, buug-gacmeed.
FR40-C Tooshka Tooska ah
Nidaamka caadiga ah.
FR40-C Laab Laab
Gaar u ah naqshadaynta laydhka indhaha ee laablaaban.
Ka baaraandegidda beer weyn oo dabacsan
Iyada oo loo marayo xakamaynta nidaamka feejignaanta firfircoon, waxaa laga shaqeyn karaa 150 * 150mm ilaa 1200 * 1 200mm goobta shaqada.
Cabbirka booska yar
Waxay le'eg tahay xawaaraha C30, 30% meesha ugu fiican.
Muujinta Codsiga
●Calaamadaynta garoonka weyn
●Goynta Laser-ka
●Qorista Laser
●Duubista
Qodista qolofka Laptop-ka
Goynta filimka
Duubista
Muuqaalka Codsiga
Macluumaadka Farsamada Alaabta
| Nooca | FR40-C Tooshka Tooska ah | FR40-C Laab Laab | |
| lts | Korantada wax soo saarka (VDC) | ±24 | ±24 |
| Hadda (A) | 12A | 12A | |
| Baratakoolka | XY2-100 Protocol | XY2-100 Protocol | |
| Miisaanka (KG) | 15 | 21.5 | |
| Cabbirka (mm) | 538*200*242.5 | 547.5*200*184.5 | |
| Tilmaamaha indhaha | Cabbirka Daloolka (mm) | 40 | 40 |
| Dhexroorka laydhka wax-soo-gelinta (mm) | 7.5, 9, 12.5 | 7.5, 9, 12.5 |
| Tilmaamaha Galvanometer | Xagasha iskaan (°) | 11.5 |
| Ku celcelinta (μrad) | 8 | |
| Gaadhida ugu badan (ppm/k) | 100 | |
| Max.Offset Drift (μrad/k) | 30 | |
| Socod wakhti dheer ah oo ka badan 8 saacadood (mrad) | ≤0.2 | |
| Khalad (ms) | ≤0.68 | |
| Xawaaraha ugu sarreeya. | 300@400x400 |
FR40-C Tooshka Tooska ah
| Goobta Shaqada & Dhexroorka Goobta | Goobta Shaqada (mm) | 150x150 | 250x250 | 350x350 | 450x450 | 500x500 | 600×600 | 800x800 | 1000x1000 | 1200x1200 |
| Dhexroorka Min.Spot@1/e2(mm) | 0.12 | 0.162 | 0.215 | 0.256 | 0.275 | 0.32 | 0.443 | 0.551 | 0.645 | |
| Dhererka foorarka (mm) | 216 | 316 | 416 | 516 | 566 | 676 | 976 | 1216 | 1456 |
FR40-C Laab Laab
| Goobta Shaqada & Dhexroorka Goobta | Goobta Shaqada (mm) | 150x150 | 250x250 | 350x350 | 450x450 | 500x500 | 600×600 | 800x800 | 1000x1000 | 1200x1200 |
| Dhexroorka Min.Spot@1/e2(mm) | 0.12 | 0.162 | 0.215 | 0.256 | 0.275 | 0.32 | 0.443 | 0.551 | 0.645 | |
| Dhererka foorarka (mm) | 212.5 | 312.5 | 412.5 | 512.5 | 562.5 | 892.5 | 972.5 | 1212.5 | 1452.5 |
Sawirka Makaanikada
FR40-C Tooshka Tooska ah
FR40-C Laab Laab
Halkan ku qor fariintaada oo noo soo dir
