Special Design for Industrial Laser Marking - 3-Axis-1-Point Focus Module – FEELTEK
Special Design for Industrial Laser Marking - 3-Axis-1-Point Focus Module – FEELTEK Detail:
Product characteristics
1. FUTURE SCAN provides greater field of view and minimal spot distortion in comparasion with 2D scanner.
a) The traditional 2D vibrating mirror spot Y mirror axis movement results in the loss of the effective range of the actual focal plane Y component and the spot distortion of the two components of the whole field of view.
b) FUTURE SCAN adopts a three-axis mirror, and through optical compensation, the reflecting surface of the XY component is at the center of the Y galvanometer, and the maximum field of view of the F-mirror field lens can be maximally utilized, and meanwhile, the light spots of the two components can be guaranteed to be consistent and free of distortion.
2. Standard XY2-100 protocol, compatible with popular control card on the market.
3. Due to the simplification of control, under same light diameter,FUTURE SCAN has the same electrical response index and repetition accuracy as the standard 2D scanner.
4. Provide scanner options with 355, 532, 1064(nm)and kinds of other wavelength.
General specification
Power Supply | Input Voltage(VAC) | 170~264 |
Output Voltage(VDC) | ±15 | |
Current(A) | 10A |
Environmental Requirement
Ambient temperature(°) | 25±10℃ |
Storage temperature(°) | -10~+60℃ |
Humidity | ≤75% non condensing |
Galvanometer Specifications
Scan Angle(°) | ±10 |
Repeatability(μrad) | 5 |
Max. Gain Drift(ppm/K) | 50 |
Max. Offset Drift(μrad/K) | 15 |
Long-termdriftover8h(mrad) | ≤0.1 |
Tracking Error(ms) | ≤0.3 |
Optical Specifications
Aperture Size(mm) | 10/14 | |
Input beam diameter(mm) | 10/14 | |
Support wavelength(nm) | 355 | 1064 |
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand overseas business" is our development strategy for Special Design for Industrial Laser Marking - 3-Axis-1-Point Focus Module – FEELTEK , The product will supply to all over the world, such as: Zambia , Detroit , Nepal , So far our merchandise have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have now 13years experienced sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to provide our customers with high quality items and excellent service.
By David from Mauritania - 2018.02.04 14:13
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
By Flora from Jamaica - 2018.12.05 13:53