3D Dynamic Focus System一FR10-F

Inkcazelo emfutshane:

Iiyunithi ezi-3 zokuphambuka kwe-axis

Ubude benkxaso: 1064nm

XY2-100 protocol

intsimi yomsebenzi: 100 * 100mm kunye ne-200 * 200mm

ifayibha laser ukumakisha, 3D laser umkrolo, laser etching

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Usetyenziso

Iindawo ezininzi ezisebenzayo

Ngaphandle kweqonga elishukumayo elongezelelweyo, inkqubo yokugxila eguquguqukayo inokufezekisa ukuphawula okuchanekileyo kwe-3D, ukukrola kunye nezinye izicelo ze-laser.

Ixesha elinye lokumakisha i-3D ngaphandle komehluko wechromatic

Ukumakishwa kwekhowudi yokulandela umphezulu we-3D

Umzobo we-3D womphezulu

Umkrolo wobudoda kunye nebhinqa

Imathiriyeli ekhethekileyo ekrolwa nzulu (izinto: SIC)

Ukuqaqambisa isicelo

Iintlobo zesixhobo seLaser somsebenzi wokukrola

Sincoma i-laser ye-pulse engaphantsi kwe-100 watts ukucubungula umzobo. Nangona i-laser enamandla kakhulu inokuba ne-etching enzulu yomgangatho omnye, nangona kunjalo, iya kukhokelela kwi-slag yezinto kwaye ichaphazele ukuchaneka komkroli.

Ngaba ukukrolwa kwelaser kunokuchaneka ngakumbi?

Ukuchaneka kokulungiswa kwenkqubo yogxininiso eguqukayo kunempembelelo yentsingiselo kwisiphumo sokukrola.
Sivula iqonga lokulungisa leCCD elizenzekelayo, izixhobo zokulungisa iskena kubasebenzisi ukuba ziyafuneka.
Ukongeza, ividiyo yomyalelo we-FEELTEK iya kwabelana ngendlela yokufezekisa ulungiso oluchanekileyo.

Izixhobo zokukrola

Izinto ezifanelekileyo ze-F10: ubhedu, intsimbi ye-carbon, intsimbi yokubumba, insimbi engenasici, i-SIC njl.
I-FEELTEK inokwabelana ngeeparamitha zesikhokelo sesicelo kwizinto ezingentla.

ISoftware yeNkqubo yokuJonga iDynamic ekulula ukuyisebenzisa

-- LenMark_3DS

Ukusebenza lula

Isoftware yeLenMark eziphuhlisileyo ikhethekileyo kulawulo lokugxila oluguqukayo. I-interface ye-3D kulula ukuyisebenzisa, inokungenisa imifanekiso ye-3D ngokuthe ngqo, ihlele kwaye imephu, iqonde ngokukhawuleza i-3D yolawulo oluchanekileyo lokucubungula.

Ukutshintsha kojongano lolwimi

Ngokusebenzisa isikhokelo semenyu, inokuphumeza iswitsha yojongano lwesofware kwiilwimi ezahlukeneyo ngaphandle kokuphinda iqale isoftware.

Ividiyo yosetyenziso

Product Information Technical

Izinto

Ukunikezwa Amandla	Umbane ophumayo (VDC)	Umfanekiso we-15VDC
	Okwangoku(A)	10A
Ujongano Lwemveliso		xY2-100 iProtocol
Ubushushu be-Ambient ( ℃)		25土10
Ubushushu boGcino ( ℃)		-10~+60
Ukufuma		≤75% ayinciphisi
Ubunzima		7kg

Iinkcukacha

Umgca wemveliso		F10 / F10 Pro
umbono iinkcukacha	Inkxaso yobude bobude	1064mm
	Ubungakanani boMvula (mm)	10
	Idayamitha yebhili yegalelo(mm)	8.5
Galvanometer Iinkcukacha	Iengile yokuskena(°)	±10
	Ukuphinda-phinda(μrad)	8
	I-Max.Gain Drift(ppm/k)	100
	I-Max.Offset Drift(μrad/k)	30
	Ukuhamba kwexesha elide ngaphezulu kwe-8h(mrad)	≤0.3
	Imposiso yokulandela umkhondo (ms)	≤0.13
	Ubuninzi besantya sokucutshungulwa(amagama/s)	600@100x100