I-3D Dynamic Focus System一FR10-U
Uyilo olubambeneyo, kulula ukudityaniswa
Iqokobhe le-CNC, uthintelo lothuli, ubume be-compact, kulula ukudibanisa. Ukugcinwa kwedatha yobude bogxininiso xa utshintsha indawo yokusebenza.
Kulula ukutshintsha indawo yomsebenzi
I-knob yohlengahlengiso isetyenziselwa ukutshintshela phakathi kwemimandla eyahlukeneyo yomsebenzi ngaphandle kokutshintsha nawaphi na amalungu.
Ukusetyenzwa kwentsimi enkulu ethambileyo
Ukuqhuba kabini uyilo lwemodyuli ye-axis eguqukayo yemodyuli, impendulo frequency≥100HZ@±10°, kulula ukufikelela kubunzulu be-Z 150mm@300mmx300mm, isetyenziswe kwiqonga, ukusetyenzwa kwesantya esiphezulu se-3D.
Phumelela 600x600x150mm isicelo somphezulu ogobileyo
Ngolawulo lwe-axis yesi-3 ukufikelela kwindawo enkulu yomsebenzi, ubungakanani bendawo encinci.
I-3D Surface Processing
I-FR10-U isebenzisa itekhnoloji yolawulo logxininiso oluguquguqukayo, iphula umda wokumakisha ngokwesiko, kwaye ayinakwenza ukugqwesa ukumakisha kwindawo enkulu, indawo ye-3D, amanyathelo, umphezulu wekhowuni, umphezulu wethambeka kunye nezinye izinto.
Ukuqaqambisa isicelo
●Ukumakishwa kwebala elikhulu
●Ukukrolwa komphezulu ogobileyo
●Ukumakishwa kwe-3D
●Ukumakishwa kwePCB
I-Automotive yangaphakathi yokuhombisa icandelo lonyango lwezinto
Ukumakishwa kwezixhobo zekhaya
Ukufakwa kwezinto ezikhethekileyo
Ukumakishwa kweglasi ye-3D
Ividiyo yosetyenziso
Product Information Technical
| Izinto | Umbane ophumayo (VDC) | ±15VDC |
| Okwangoku(A) | 10A | |
| Umgaqo-nkqubo | XY2-100 Protocol | |
| Ubunzima(KG) | 7 | |
| Ubungakanani(mm) | 292*115*152.8 | |
| IiNkcazo ze-Optical | Ubungakanani boMvula (mmm) | 10 |
| Idayamitha yebhili yegalelo(mm) | 6.5 |
| Iinkcazo zeGalvanometer | Umgca wemveliso | Umgangatho | UPro | P2 |
| Iengile yokuskena(°) | ±10 | ±10 | ±10 | |
| Ukuphinda-phinda(μrad) | 8 | 8 | 5 | |
| I-Max.Gain Drift(ppm/k) | 100 | 100 | 50 | |
| I-Max.Offset Drift(μrad/k) | 30 | 30 | 15 | |
| Ukuhamba kwexesha elide ngaphezulu kwe-8h(mrad) | ≤0.2 | ≤0.2 | ≤0.1 | |
| Imposiso yokulandela umkhondo (ms) | ≤0.13 | ≤0.13 | ≤0.13 | |
| Ubuninzi besantya sokucutshungulwa(amagama/s) | 600@100x100 | 600@100x100 | 600@100x100 |
| Ibala eliSebenzayo kunye nobubanzi beNdawo | Indawo yokusebenza(mm) | 125x125x40 | 200x200x120 | 300x300x150 | 400x400x150 | 500x500x150 | 600×600x150 |
| I-Min.Spot Diameter@1/e2(mm) | 0.010 | 0.015 | 0.022 | 0.026 | 0.033 | 0.039 | |
| Ubude bokujongisisa(mm) | 144 | 234 | 354 | 474 | 594 | 714 |
Umzobo oomatshini
Ii-FAQs
I-FEELTEK esekwe kwi-2014, izinikele kwi-3D laser dynamic focus technology. Siyikhulula itekhnoloji kumashishini amaninzi e-3D wokusetyenzwa kwelaser, njengokumakishwa kwelaser ye-3D, ukukrolwa, ukuwelda kwelaser, ukomba, ukuvelisa okongeziweyo, unyango lomphezulu, kunye nezinye iintlobo zezisombululo zokusetyenzwa kwelaser.
I-FEELTK yinkampani egxile kubugcisa. I-85% yabasebenzi ikwindawo yokusebenza, yezobugcisa, yeqela lophuhliso, ngelixa i-15% ikwizikhundla zolawulo.
Phakathi kwemigca yemveliso, enye yemigca yokukhuphisana yintloko ye-scan ye-3D. Ekubeni sinamakhadi okulawula aphuhlisiweyo kunye nesoftware, sinokubonelela ngokumakishwa komphezulu we-3D, ukukrola, ukuwelda, ukuvelisa okongeziweyo, ukuguqulwa komphezulu, kunye nezinye iintlobo zezisombululo ze-laser.
