I-3D Dynamic Focus System – FR40-C
Isantya esiphezulu se-Max.scan 30% indawo ekugxilwe kuyo kakuhle PK FR30-C
II-IV amacandelo optical, ilahleko encinane ukukhanya kunye thinner indawo 0.12mm@150x150mm@10640nm.
Uyilo olukhethiweyo lokupholisa amanzi, lunokusetyenziswa kwiimfuno zobushushu obuphezulu.
Inketho yohlengahlengiso oluzenzekelayo ekukhethweni, ukugqiba ibala lomsebenzi kunye nokutshintsha ubude obugxininise kwisoftware.
Inketho yokulungelelanisa: oluzenzekelayo, lwencwadana.
FR40-C Linear Beam
Inkqubo esemgangathweni.
I-FR40-C i-Folded Beam
Ngokucacileyo kuyilo olusongelweyo lwebhali ye-optical.
Ukusetyenzwa kwentsimi enkulu ethambileyo
Ngolawulo lwenkqubo yokugxila eguquguqukayo, inokusebenza ukusuka kwi-150 * 150mm ukuya kwi-1200 * 1 200mm intsimi yomsebenzi.
Ubungakanani bendawo encinci
Ilingana nesantya se-C30, i-30% indawo egxininisekileyo.
Ukuqaqambisa isicelo
●Ukumakishwa kwebala elikhulu
●Ukusika iLaser
●Laser Scribing
●Ukwenza ifilimu
Iqokobhe leLaptop yokwemba
Ukusika ifilimu
Ukwenza ifilimu
Ividiyo yosetyenziso
Product Information Technical
| Inguqulelo | FR40-C Linear Beam | I-FR40-C i-Folded Beam | |
| ltms | Umbane ophumayo (VDC) | ±24 | ±24 |
| Okwangoku(A) | 12A | 12A | |
| Umgaqo-nkqubo | XY2-100 Protocol | XY2-100 Protocol | |
| Ubunzima(KG) | 15 | 21.5 | |
| Ubungakanani(mm) | 538*200*242.5 | 547.5*200*184.5 | |
| IiNkcazo ze-Optical | Ubungakanani boMvula (mm) | 40 | 40 |
| Idayamitha yebhili yegalelo(mm) | 7.5, 9, 12.5 | 7.5, 9, 12.5 |
| Iinkcazo zeGalvanometer | Iengile yokuskena(°) | 11.5 |
| Ukuphinda-phinda(μrad) | 8 | |
| I-Max.Gain Drift(ppm/k) | 100 | |
| I-Max.Offset Drift(μrad/k) | 30 | |
| Ukuhamba kwexesha elide ngaphezulu kwe-8h(mrad) | ≤0.2 | |
| lracking imposiso (ms) | ≤0.68 | |
| Ubuninzi besantya sokwenza[amagama/s) | 300@400x400 |
FR40-C Linear Beam
| Ibala eliSebenzayo kunye nobubanzi beNdawo | Indawo yokusebenza(mm) | 150x150 | 250x250 | 350x350 | 450x450 | 500x500 | 600×600 | 800x800 | 1000x1000 | 1200x1200 |
| I-Min.Spot Diameter@1/e2(mm) | 0.12 | 0.162 | 0.215 | 0.256 | 0.275 | 0.32 | 0.443 | 0.551 | 0.645 | |
| Ubude bokujongisisa(mm) | 216 | 316 | 416 | 516 | 566 | 676 | 976 | 1216 | 1456 |
I-FR40-C i-Folded Beam
| Ibala eliSebenzayo kunye nobubanzi beNdawo | Indawo yokusebenza(mm) | 150x150 | 250x250 | 350x350 | 450x450 | 500x500 | 600×600 | 800x800 | 1000x1000 | 1200x1200 |
| I-Min.Spot Diameter@1/e2(mm) | 0.12 | 0.162 | 0.215 | 0.256 | 0.275 | 0.32 | 0.443 | 0.551 | 0.645 | |
| Ubude bokujongisisa(mm) | 212.5 | 312.5 | 412.5 | 512.5 | 562.5 | 892.5 | 972.5 | 1212.5 | 1452.5 |
Umzobo oomatshini
FR40-C Linear Beam
I-FR40-C i-Folded Beam
Bhala umyalezo wakho apha kwaye uwuthumele kuthi
