I-3D Dynamic Focus System – FR40-C

Incazelo emfushane:

3-eksisi amayunithi okuchezuka

ubude be-wavenge bokusekela: 10640nm.10200nm, 9400nm

Iphrothokholi ye-XY2-100

inguqulo yokumaka engaphezulu egobile kanye nenguqulo enkulu yokumaka yenkambu yezinketho

ukucutshungulwa kwezinkundla ezinkulu zokusebenza ezinendawo encane

Ilingana nesivinini esingu-FR30-C, 30% ikhwalithi yokugxila ecolekile

ukuqoshwa kwe-laser, ukusika ukufa

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Isivinini se-Max.scan esingu-30% indawo okugxilwe kuyo kangconywana PK FR30-C

Izingxenye ze-II-IV ezibonakalayo, ukulahleka kokukhanya okuncane okunendawo ezacile 0.12mm@150x150mm@10640nm.

Umklamo wokupholisa amanzi ozikhethela, ungasetshenziswa ezidingweni zokukhukhuleka kwezinga lokushisa eliphezulu.

Inketho yokulungisa okuzenzakalelayo kokugxila kuyo ukukhetha, ukuqedela inkambu yomsebenzi kanye nokushintsha ubude be-focal ngokusebenzisa isofthiwe.

Inketho yokulungisa okugxilwe kuyo: okuzenzakalelayo, okwenziwa ngesandla.

FR40-C Linear Beam

Uhlelo olujwayelekile.

I-FR40-C Egoqiwe Beam

Icaciselwe umklamo ogoqiwe we-optical beam.

Ukucutshungulwa kwenkambu enkulu eguqukayo

Ngokusebenzisa i-dynamic focus system control, ingasetshenziswa kusukela ku-150*150mm kuya ku-1200*1 200mm inkambu yomsebenzi.

Usayizi wendawo encane

Ilingana nesivinini se-C30, indawo egxile kakhulu engu-30%.

Ukugqamisa Isicelo

●Ukumaka kwenkambu enkulu

●I-Laser Cutting

●I-Laser Scribing

●Ukuqopha

I-Laptop shell drilling

Ukusika ifilimu

Ukuqopha

Ividiyo yohlelo lokusebenza

Ulwazi Lobuchwepheshe Lomkhiqizo

Inguqulo		FR40-C Linear Beam	I-FR40-C Egoqiwe Beam
ltms	I-Output Voltage(VDC)	±24	±24
	Okwamanje(A)	12A	12A
	Iphrothokholi	I-XY2-100 Protocol	I-XY2-100 Protocol
	Isisindo(KG)	15	21.5
	Usayizi(mm)	538200242.5	547.5200184.5
Imininingwane ye-Optical	Usayizi wembobo(mm)	40	40
Imininingwane ye-Optical	Okokufaka kwebhimu(mm)	7.5, 9, 12.5	7.5, 9, 12.5

Imininingwane ye-Galvanometer	I-engeli yokuskena(°)	11.5
	Ukuphindaphinda (μrad)	8
	I-Max.Gain Drift(ppm/k)	100
	I-Max.Offset Drift(μrad/k)	30
	Ukushayela isikhathi eside ngaphezu kuka-8h(mrad)	≤0.2
	lracking Iphutha(ms)	≤0.68
	Isivinini esikhulu sokucubungula[izinhlamvu/s)	300@400x400

FR40-C Linear Beam

Inkambu Yokusebenza & Ububanzi bendawo	Inkambu yokusebenza(mm)	150x150	250x250	350x350	450x450	500x500	600×600	800x800	1000x1000	1200x1200
	I-Min.Spot Diameter@1/e2(mm)	0.12	0.162	0.215	0.256	0.275	0.32	0.443	0.551	0.645
	Ubude bokugxila(mm)	216	316	416	516	566	676	976	1216	1456

I-FR40-C Egoqiwe Beam

Inkambu Yokusebenza & Ububanzi bendawo	Inkambu yokusebenza(mm)	150x150	250x250	350x350	450x450	500x500	600×600	800x800	1000x1000	1200x1200
	I-Min.Spot Diameter@1/e2(mm)	0.12	0.162	0.215	0.256	0.275	0.32	0.443	0.551	0.645
	Ubude bokugxila(mm)	212.5	312.5	412.5	512.5	562.5	892.5	972.5	1212.5	1452.5