I-3D Dynamic Focus System – FR70-C
Inkambu yomsebenzi enkulu kakhulu Inkundla enkulu ejwayelekile
Inketho yokulungisa okugxilwe kuyo: okuzenzakalelayo, okwenziwa ngesandla.
Ukucutshungulwa kwenkambu enkulu eguqukayo
Ngokulawulwa kwesistimu yokugxila eguquguqukayo, kungaba inkambu engu-0.64@2000x2000mmworkwork.
Usayizi wendawo oncomekayo, isivinini esikhulu kakhulu.
FR70-C ubuncane bomugqa wendawo 0.12@350x350mm@10640mm.
FR70-C usayizi wendawo ocoke kakhulu, isivinini esiphezulu, umphumela wokusika obushelelezi, umthelela omncane wokushisa.
Ukusika isikhumba ngaphandle kokunamathela nokushaja.
Ukugqamisa Isicelo
●Roll ukuze ugoqe ukumakwa kwesikhumba
●Ukumaka komugqa onyakazayo wendawo egobile
●Ukuqopha
●Ukubhoboza
Inguqulo yomugqa omkhulu omkhulu onyakazayo (@2000x2000mm)
Ukumaka okukhulu kwesikhumba
Ukumaka nokusikwa kwesikhumba senkundla enkulu kakhulu
(isetshenziswa kakhulu ekusikeni i-sandpaper, ukusika i-carbon fiber, ukusika isikhumba)
Ividiyo yohlelo lokusebenza
Ulwazi Lobuchwepheshe Lomkhiqizo
| Izinto | I-Output Voltage(VDC) | ±24 |
| Okwamanje(A) | 6A(Rms) 19A(Prack) | |
| Iphrothokholi | I-XY2-100 Protocol | |
| isisindo (KG) | 34 | |
| Usayizi(mm) | 655*250*278 |
| isimo sokupholisa | Ukupholisa Imidiya | Amanzi acwengekile noma akhishwe i-ionized kanye ne-corrosion inhibitor |
| Izinga lokushisa(°C) | 22-28 | |
| Ingcindezi yokupholisa enconyiwe (ibha) | 2-3 | |
| Izinga lokugeleza elinconyiwe(l/min) | 4-6 |
| Imininingwane ye-Optical | Isibuko esikhanyayo(mm) | I-SIC |
| I-Wavelength(nm) | 10600nm | |
| Ukudluliswa kwelensi eyodwa | ≥99.7% | |
| Ukudluliswa kwesistimu | ≥82% | |
| Usayizi wembobo(mm) | ≤65mm | |
| Ububanzi be-subsystem inputbeam(mm) | 13.5 ~ 15mm | |
| Inkomba yokumboza | 1/2λ(PV) |
| Imininingwane ye-Galvanometer | I-SkenaAngle(°) | ±11 |
| Ukuphindaphinda (μrad) | 8 | |
| I-Max.Gain Drift(ppm/k) | 100 | |
| I-Max.Offset Drift(μrad/k) | 30 | |
| Ukushayela isikhathi eside ngaphezu kuka-8h(mrad) | ≤0.3 | |
| Iphutha lokulandelela(ms) | ≤1.2 | |
| Isivinini esikhulu sokucubungula(ama-dharaters/s) | 8000mm/s@1200×1200;4000mm/s@650x650 | |
| Hlanza igesi | Hlanza igesi | I-N2(ubumsulwa 99.95%)noma Ihlanzekile, Umoya Omile (ubumsulwa 99.995%, uwoyela awunawo, i-micron eyi-1 ihlungiwe) |
| * Enye igesi engahlangabezani nemibandela eshiwo ngenhla ayivunyelwe ukuthi isebenze kulolu hlelo oluncane. | ||
Inguqulo Yensimu Enkulu
| Inkambu Yokusebenza & Ububanzi bendawo | Inkambu yokusebenza(mm) | 700x700 | 800x800 | 900x900 | 1000x1000 | 1200×1200 | 1600×1600 | 2000×2000 |
| I-Min.Spot Diamneter@1/e2(mrm) | 0.27 | 0.31 | 0.34 | 0.38 | 0.43 | 0.54 | 0.64 | |
| Ubude bokugxila(mm) | 761 | 881 | 1001 | 1121 | 1361 | 1841 | 2321 |
Inguqulo Yensimu Encane
| Inkambu Yokusebenza & Ububanzi bendawo | Inkambu yokusebenza(mm) | 350x350 | 450x450 | 550×550 | 650×650 | 750x750 | 850x850 |
| I-Min.Spot Diameter@1/e2(mm) | 0.134 | 0.162 | 0.188 | 0.221 | 0.251 | 0.282 | |
| Ubude bokugxila(mm) | 341 | 461 | 581 | 701 | 821 | 941 |
Umdwebo Wemishini
Bhala umyalezo wakho lapha futhi usithumelele wona
